Adjustable Pipe Clamps
Download Cut Sheet

Standard Dimensions:

  • Hole Diameter: 13/32"

  • Hole Spacing (From End): 13/32"
    Accommodates 3/8"
    Hardware

  • Hole Spacing (On Center): 1-5/8"

  • Width: 1-5/8"

  • Thickness: 3/8"
Part No. O.D. Pipe Size (in.) Design Load (lbs.)* Type 1 Design Load (lbs.)* Type 2 Torque (ft./lbs.)
200-3100 1/2 - 1-1/2 135 65 10 in./lbs.
200-3110 1-1/2 - 2-1/4 135 65 3
200-3120 2-1/4 - 3-1/4 145 70 3
200-3130 3/4 215 70 3
200-3140 4 - 6-1/2 215 70 3





*Design loads shown represent a 3:1 safety factor.
Aickinstrut Adjustable Pipe Clamps are manufactured from glass-reinforced polyurethane and are adjustable to accommodate a wide range of outside diameters. They can be utilized with a variety of piping systems including: PVC, fiberglass, copper, rigid steel conduit and PVC coated rigid steel conduit. Aickinclamps sized 61/2" - 20" are to be used only in non-load bearing applications. These are applications where the weight of the pipe is being supported by Aickinstrut structural members (see figure on right). Aickinclamps can safely be used in temperatures up to 160°F. For operating temperatures of 160-230°F, it is recommended to use PVDF clamps. PVDF clamps are available as a special order. Contact the factory for pricing and availability. Care should be taken not to exceed 3 ft./lbs. of torque on the adjustable pipe straps.